Hệ Thống Điện Năng Lượng Mặt Trời Hòa Lưới 60Kw 3 Pha

Principle of operation  SOLARCITY 60 KWP 3 PHASE SOLARCITY BATTERY  SYSTEM 

– The electricity obtained from the battery panel (Solar Panel) is DC, via the grid tie (Grid Tie Inverter), with the function of converting DC – AC electricity in the same phase with the same frequency as the grid, then the system will be In conjunction with the grid:

+ When the grid capacity is equal to the load capacity, the load consumes completely electricity from solar cells.

Choosing the right SOLARCITY 60 KWP 3 PHASE SOLAR BATTERY BATTERY  SYSTEM 

Grid  system is open system, system capacity does not depend on the load capacity used.

For example: An office with a capacity of 10KW / h. Use from 8 am – 4 pm. Total electricity used is: P = 10 * 8 = 80KW:

– If the office invests in a 10KW grid system, the amount of electricity connected to the grid per day is about 40KW, counting 8 hours of sunshine (depending on sunny conditions in each region). The amount of electricity saved about: 40/80 = 50% of power consumption

– If the office invests in a 20KW grid system (maximum), then the amount of electricity connected to the grid is about 80KW / day (average in Vietnam 1 day 8h peak sunshine). The amount of electricity saved in a day is about: 80/80 = 100% of the electricity consumed.

SOLUTION OF SOLAR BATTERY  SYSTEM  60 KWP 3 PHASE  includes the following devices:

 Some photos of the project have been taken

Project 20KwP Di An – Binh Duong 

Project 15Kwp Q12 – HCMC

Project of 8Kwp Phu Long – Binh Duong

Ba Ria – Vung Tau 5Kwp Project

Customers wishing to contact the hotline 0909 296 297 or the nearest agent for support, free advice.

LƯU Ý : Mọi thông số trên tất cả các sản phẩm của Website đều mang tính chất tham khảo theo thuyết tương đối và hoàn toàn có thể thay đổi mà không báo trước